TEST DATA

NT10 BSI Part L Tests

The NT10 has been tested by the BSI in accordance with the 2013 lumen/circuit watt requirements for UK Building Regulations Part L1 (Domestic) and Part L2 (Industrial) both A & B. Click on the link for the BSI Test Summary.

 

NT10 CREE Tempo 21 Test Summaries

The NT10 range has been submitted for Tempo 21 (Thermal, Electrical, Mechanical, Photometric, Optical) evaluation by CREE. Click on the link for the CREE Test Summaries detailing luminous flux and lumen/circuit watt information.

 

NT10 Photometric Data

The NT10 range has been tested by CREE for photometric output. Click on the link for the relevant data in polar and cone format.

 

NT10 Lifetime Test

The NT10 (4250K, 60º version) has been tested by CREE in accordance with LM-80 to provide a reported and projected lifetime in accordance with IES TM-21-2011. Click on the link for the test results.

 

NT10 LED Selection

LED Evolution follows the ANSI recommendation that lamp manufacturers select LEDs from a within a 4-step elipse of any Correlated Colour Temperature (CCT) target point. Click on the link below for full details.

 

NT10 Optical Efficiency

The NT10 (4250K, 60º version) has been tested by CREE for optical efficiency. Click on the link for the test results.

 

NT10 Thermal Efficiency

The NT10 (4250K, 60º version) has been tested by CREE for thermal efficiency. Click on the link for the test results.

 

NT10 Solder Point Thermal Analysis

The NT10 (4250K, 60º version) has been tested by CREE for solder point temperature. Click on the link for the test results.

 

NT20 CREE TEMPO 24 TEST SUMMARIES

The NT20 has been submitted for Tempo 24 (Thermal, Electrical, Mechanical, Photometric, Optical) evaluation by CREE. Click on the link for the CREE Test Summaries detailing luminous flux and lumen/circuit watt information.

 

NT20 PHOTOMETRIC DATA

The NT20 range has been tested by CREE for photometric output. Click on the link for the relevant data in polar and cone format.

 

NT20 Lifetime Test

The NT20 (4250 40º version) has been tested by CREE in accordance with LM-80 to provide a reported and projected lifetime in accordance with IES TM-21-2011. Click on the link for the test results.

 

NT20 LED Selection

The NT20 is manufactured using LEDs selected from within a 2-step elipse of any Correlated Colout Temperature (CCT) target point. Click on the link below for full details.

 

NT20 Thermal Efficiency

The NT20 (4250 40º version) has been tested by CREE for thermal efficiency. Click on the link for the test results.

 

NT20 Solder Point Thermal Analysis

The NT20 (4250 40º version) has been tested by CREE for solder point temperature. Click on the link for the test results.

 

PSU10 Efficiency Tests

The PSU10 Driver has been tested by CREE for Efficiency, Power Factor and Harmonic Distortion. Click on the link for the test results.

 

PSU20 Efficiency Tests

The PSU20 Driver has been tested by CREE for Efficiency, Power Factor and Harmonic Distortion. Click on the link for the test results.

 

 

 

 

 

 

LED Evolution

© copyright LED Evolution Ltd 2015 | Terms
LED Evolution, Unit 15, 1000 North Circular Road, Staples Corner, London NW2 7JP
Telephone: 020 8208 4080 | Email: sales@led-evolution.com

CE logoBSI logoCREE logoCUL logoCUL logo